How to use PVC edge banding?

The use of PVC edge banding mainly includes the following steps:

Preparation: First, place the board to be edge-banded on the workbench and prepare the edge banding and utility knife. If there are burrs on the edge of the board, you need to trim them with a utility knife first to avoid affecting the sticking effect of the edge banding.

Gluing: Apply an appropriate amount of glue to the edge of the edge banding and the edge of the board. Before gluing, you can use masking tape to protect the edge of the board to prevent glue leakage and contamination.

Fitting the edge banding: Stick the edge banding on the edge of the board with glue to ensure that the edge banding fits tightly with the board. When fitting, press with appropriate force to ensure that there are no bubbles or gaps.

Trimming: Use a utility knife to trim the excess part so that the edge banding is flush with the edge of the board to maintain beauty.